Wood-mizer LX55 - Safety; Safety Symbols; Safety Instructions; Safety Decals

Safety
Safety Symbols
Safety LX55 9/17/20 2-1
2
SECTION 2 SAFETY
2.1 Safety Symbols
The following symbols and signal words call your attention to instructions concerning your per-
sonal safety. Be sure to observe and follow these instructions.
indicates an imminently hazardous situation which, if not avoided, will
result in serious injury or death.
suggests a potentially hazardous situation which, if not avoided, could
result in serious injury or death.
refers to potentially hazardous situations which, if not avoided, may result
in minor or moderate injury or damage to equipment.
NOTICE indicates vital information pertaining to equipment.
NOTE: contains useful information.
2.2 Safety Instructions
OWNER/OPERATOR'S RESPONSIBILITY
The procedures listed in this manual may not include all ANSI, OSHA, or locally required safety
procedures. It is the owner/operator’s responsibility and not Wood-Mizer LLC to ensure all
operators are properly trained and informed of all safety protocols. Owner/Operators are
responsible for following all safety procedures when operating and performing maintenance to
the equipment.
Observe ALL Safety Instructions
NOTICE Read the entire Operator's Manual before operating this
equipment.
Note all safety warnings throughout this manual and those posted on the
machine.
Be able to access this manual at all times while operating this equipment.
DANGER!
WARNING!
CAUTION!