Assembly
Assemble the Log Bed
3
3-4 LX55 9/17/20 Assembly
7. Slide the mast uprights into the mast carriage rollers and loosely secure with M10x80mm bolts
as shown in Fig. 3-3.
Use assistance in lowering the sawhead. Avoid injury and
equipment damage.
8. Set the sawhead in a stable vertical position.
NOTE: Do not assemble more on the carriage until later steps are com-
pleted.
3.5 Assemble the Log Bed
The bed should be assembled on its operation site.
NOTE: Do not assembly the catch rail to the bed until after the carriage
has been placed on it.
FIG. 3-3
Bolt, M10x80mm,
Carriage
Nut, M10 Flanged
Nylon Lock
To Next Page
Loading...
