Wood-mizer LX55 - Assemble the Bed Sections

Assembly
Assemble the bed sections
Assembly LX55 9/17/20 3-5
3
Assemble the bed sections
1. Attach the track rails to the cross rail by loosely securing the M10x30mm bolts. See Fig. 3-4.
NOTE: The head section cross rails are closer together then the other two
sections.
2. Assemble all the track rails and cross rails ensuring all of the cross rails face the same direction.
3. Tighten all bolts on the tab side of the cross rails.
4. Adjust the track and cross rails (if needed) to square them.
5. Tighten all bolts.
OPTIONAL LEVELING FEET
Install the optional leveling feet as shown in Fig.
3-5.
FIG. 3-4
FIG. 3-5
55001-9
Track rails
Cross rails
Bolt, M10x30mm, Class 8
Head section
Tab
Washer, M10 Flat
Nut, M10 Flanged
Nylon Lock