Assembly
Assemble the log clamps
Assembly LX55 9/17/20 3-7
3
NOTE: Optional bed extension sections may be added at this time, in the
same manner as the standard bed sections.
NOTE: If using optional leveling feet or runners, attach them now before
adding weight to the log bed.
Assemble the log clamps
1. Insert the log clamp arm and side support onto the rod.
2. Install the clamp screw and clamp point on the log clamp arm. See Fig. 3-8.
3. Install the mounting brackets to the rod with M10x20mm bolts.
4. Insert the side support adjustment hardware.
FIG. 3-8
Bolt, M10x20mm,
Class 8
Mounting Bracket
Side Support
Rod
Clamp Screw
Clamp Point
Bolt, M6x50mm
Class 8.8
Log Clamp Arm
Washer, M10 Flat
Washer, M10 Flat
Nut, M6
Nylon Lock
To Next Page
Loading...
