Wood-mizer LX55 - Carriage Placement

Assembly
Bed leveling
Assembly LX55 9/17/20 3-9
3
Bed leveling
1. Use a 4-foot (120cm) level (or laser level) to level the bed in all directions. See Fig. 3-11.
NOTE: The bed must be level for the sawhead to travel smoothly over the
rails.
3.6 Carriage Placement
Use 2 persons or lift equipment to move the carriage
(sawhead and mast together) to the assembled bed rails.
1. Loosen the horizontal bearings on the roller assemblies.
2. Place the carriage assembly on the sawmill bed.
3. Ensure that the vertical track roller bearings sit properly on the track rail.
FIG. 3-11
FIG. 3-12
WARNING!
55001-16
Horizontal bearings
Bearing holes are slotted