Wood-mizer LX55 - Page 34

Assembly
Install the Motor (Electric Version Only)
3
3-16 LX55 9/17/20 Assembly
10. Insert the tension rod into the lower bracket as shown in Fig. 3-24.
11. Adjust the tension rod nuts until the rod threads show about 2-5/8" (67mm) between the bottom
of the rod head and the mounting bracket. See Fig. 3-24.
12. Tighten all nuts.
FIG. 3-24
550015-03
2
-
5
/
8
Washer goes between
tension rod and clutch
Tension rod
Nut, M8 Jam
Nut, M8 Flanged
Nylon Lock
Washer, M8 Flat