Wood-mizer LX55 - Push Handle

Assembly
Push Handle
3
3-18 LX55 9/17/20 Assembly
Push Handle
1. Fasten the push handle to the frame with the M8x75mm bolts as shown in Fig. 3-26.
2. Slide the grip over the end of the push handle; use a lubricant, if necessary. .
FIG. 3-26
550015-04
Bolt, M8x75mm
Grip
Capscrew, M6x20mm
Washer, M8 Flat
Nut, M8 Flanged
Nylon Lock
Control box and mount
ELECTRIC VERSION ONLY