Maintenance
Every 160 Hours of Sawmill Operation (Monthly)
6
6-2 LX55 9/17/20 Maintenance
Open the blade housing cover and brush any sawdust buildup from the housing, cover, and
V-belts.
Every 160 Hours of Sawmill Operation (Monthly)
Apply white lithium grease to the lift cables on both sides of the sawhead.
Check if the lift cables are in good condition. If either lift cable is damaged,
immediately replace it with a new one.
Be sure the lift crank handle is lubricated. When applying the grease or oil, be careful not to
spray it onto the friction pad.
FIG. 6-1
FIG. 6-2
To Next Page
Loading...
