SPECIFICATIONS
Moulder Specifications
7
7-5 EGdoc042320 Specifications
See Table 7-9. A relation between the pattern knife protrusion and the thickness is shown below.
Pattern Knife Max Protrusion “C” depends on the knife
thickness (see table 7-9)
Pattern Knife Thickness
Pattern Knife Max. Protrusion
1
1
According to EN 847-1:2005 European Standard
3 mm 13 mm (0.512”)
4 mm 21 mm (0.827”)
5 mm 29 mm (1.142”)
TABLE 7-9
FIG. 7-2
TABLE 7-8
To Next Page
Loading...
