Wood-mizer MP100 Series - Frame Leg Adjustment

MOULDER ASSEMBLY
Frame Leg Adjustment
3
3-14 15doc042320 MOULDER ASSEMBLY
See Figure 3-8.
3.4 Frame Leg Adjustment
1. Place a foot plate under each bed leg.
2. Using an appropriate wrench, adjust each leg so that the nut is approximately 25 mm (1”) below the top of the
bed tube.
FIG. 3-8
150157b
M10
M12x140 Bolt
100076-1 Bolt
M12 Nut
13 Washer
097224
085981-1
014972