Wood-mizer MP100 Series - Page 49

SETUP & OPERATION
Moulder Setup
Operation EGdoc042320 4-4
4
See Figure 4-1.
4. Repeat the bed rail adjustment with the string at the other side of the moulder frame.
5. Move the head until it is positioned over the bed rail.
6. Measure the distance from the cutter to the bed rail in the places shown below. The dimensions A
and B should be the same.
FIG. 4-1
Equal height
object
Measure distance
between string
and bed rails
Equal height
object
String across
bed rails