Wood-mizer MP100 Series - 6.6 Safety Devices Inspection

MAINTENANCE
Safety Devices Inspection
MAINTENANCE 15doc042320 6-10
6
6.10 Safety Devices Inspection
MP100E5S Moulder – Safety Devices Inspection
Safety devices on the machine which must be checked before every shift:
 E-STOP button and its circuit inspection
 Safety handle and its circuit inspection
1
 Cutter cover safety switch and its circuit inspection.
1. E-STOP button and its circuit inspection
 Turn the key switch to the “M” position;
1
 Press and hold the safety handle;
1
 The START button should illuminate green;
 Press the START button to start the motor. The motor should start.
 Press the E-STOP button located on the control box. The motor should be stopped. Pressing
the START button should not start the motor until the E-STOP button is released and the
START button is pressed.
1. It does not concern the US version.
WMM028B
Switch,
Emergency
Stop
Switch, Motor
Start
Safety
Handle
1
Key Switch
1