4 Introduction
MAN1299 (2/28/2020)
SPECIFICATIONS
GENERAL INFORMATION
The purpose of this manual is to assist you in operating
and maintaining your mower. Read it carefully. It fur-
nishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature, due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
Some illustrations in this manual show the
mower with safety shields removed to provide a
better view. The mower should never be operated
with any safety shielding removed.
The illustrations and data used in this manual were cur-
rent at the time of printing. However, due to possible
inline production changes, your machine may vary
slightly in detail. We reserve the right to redesign and
change the machines as may be necessary without
notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the tractor facing the direction of forward travel.
TK60.20
TK72.20
3-Point Hitch Cat. 1 Cat. 1
Quick Hitch Compatible Factory Ready Factory Ready
Cutting Width 60" 72"
Cutting Height Range 1-1/2” - 5" 1-1/2” - 5"
Operating Weight with Chain Shielding 481 lbs 538 lbs
Deck Plate Thickness 10 GA 10 GA
Blade Speed (feet per minute) 17,900 18,000
Blade Spindles Cast Iron Cast Iron
Number of Blades 33
Blade Overlap 1-1/4" 1-1/4"
Blade Options
Standard: High Lift
Option: Low Lift
Standard: High Lift
Option: Low Lift
Universal Drive Series ASAE Cat. 3 ASAE Cat. 3
Caster Wheels
3.5 x 8.0
Solid Rubber
3.5 x 8.0
Solid Rubber
Tractor PTO Speed RPM 540 540
Recommended Maximum
Tractor PTO Horsepower
15 - 35 25 - 35
Chain Shielding Optional Optional
Front Roller Optional Optional
To Next Page
Loading...
