EasyManua.ls Logo

Woodstock Chimes ENCORE WATER BELL FOUNTAIN User Manual

Woodstock Chimes ENCORE WATER BELL FOUNTAIN
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENCORE WATER BELL FOUNTAIN™
by Woodstock Chimes
®
ASSEMBLY INSTRUCTIONS
Water bubbles up through a center cluster of brass bells, while two floating bells
softly chime against the others as they swirl around the fountain.
Perfect for the home or garden
Thank you for purchasing the Encore Water Bell Fountain. This fountain is designed to combine the
relaxing sounds of flowing water with the peaceful chiming of brass bells. This effect is created by two
floating bells, which softly chime against a center cluster of stationary bells as they are swept around the
fountain by an underwater current created by the pump.
PARTS LIST
When you unpack your fountain you should find:
Bowl with Pump attached
The Bell Assembly, made up of six bells mounted on a plastic base (only two bells shown)
Flow Diverter
Output Hose
Fountainhead
Two floating bells (brass bells mounted to foam floats - not shown)
1326-instructions.qxd 7/13/04 10:21 AM Page 1
Question and Answer IconNeed help?

Do you have a question about the Woodstock Chimes ENCORE WATER BELL FOUNTAIN and is the answer not in the manual?

Woodstock Chimes ENCORE WATER BELL FOUNTAIN Specifications

General IconGeneral
BrandWoodstock Chimes
ModelENCORE WATER BELL FOUNTAIN
CategoryOutdoor Fountain
LanguageEnglish

Summary

Fountain Assembly Steps

Initial Component Setup

Insert flow diverter into bell assembly and attach fountainhead.

Hose and Bowl Attachment

Attach output hose to flow diverter and secure to the bowl.

Final Assembly and Water Level

Connect diverter to pump, position assembly, add water, and place floating bells.

Power Connection and Operation

Tuck cord, ensure drip loop, and plug in fountain.

Fountain Maintenance and Usage

Adding Water

Use clean distilled water to reduce mineral build-up and check level regularly.

Continuous Operation

Ensure long pump life by cleaning fountain and pump every 2-3 months.

Operating Temperature

Avoid temperatures above 30°C (89°F) or below freezing to prevent damage.

Product Maintenance Tips

Aluminum Tubes Maintenance

Clean aluminum tubes with mild soap and water; pitting does not affect tone.

Wood Parts Care

Apply exterior oil periodically to protect wood and retard aging.

Crystal Accents Cleaning

Wipe crystals with window cleaner for a clean and shiny appearance.

Bamboo Chimes Protection

Hang away from direct sun/wind, bring in during extreme weather, and protect in winter.

Related product manuals