To Next PageTo Next Page
Need help?Do you have a question about the Woodstock Soapstone Fireview 205 and is the answer not in the manual?
General| Brand | Woodstock Soapstone |
|---|---|
| Model | Fireview 205 |
| Category | Wood stove |
| Language | English |
Prepare stove, gather materials, and remove the loading door.
Remove old gasket and clean the channel on the loading door.
Dry fit, cut, and install the new gasket with cement.
Reattach the loading door and adjust its tension.
Allow stove cement to cure for 24 hours before use.
Prepare stove, gather materials, and access the bypass door area.
Remove bypass lift guide, old gasket, and clean the channel.
Dry fit, cut, and install new gasket with glue.
Close bypass door, attach guide, adjust tension for seal.
Reinstall combustor or replace gasket under it.
Prepare stove, gather materials, and remove combustor.
Remove old gasket and clean area under combustor.
Dry fit, cut, and install new gasket with glue.
Reinstall the combustor into the stove.
Prepare stove, gather materials, remove scoop and metal.
Remove andirons, retainer, and window clips.
Remove glass panels from the front frame.
Clean glass and apply gasket to exterior panel.
Apply gasket to interior glass, considering air wash.
Place, align, and secure glass panels with clips, reattach hardware.
Check and adjust gap between interior glass and air guide.
Replace combustor scoop and expanded metal.
Prepare stove, gather materials, and remove top lid.
Remove old gasket, clean lid, and dry fit new gasket.
Apply glue, seat gasket, allow to set, and reinstall lid.
Prepare stove, remove lid, remove old gasket, clean cover.
Apply cement and install new gasket into air duct cover.
Reinstall top lid and allow furnace cement to cure.
Ensure fire is out, remove ash, and clean loose cement.
Apply new cement, smooth, and allow to cure.
