Manual 37443A DSLC-2 - Digital Synchronizer and Load Control
Page 120/226 © Woodward
6. Draw the switch and its network for Ethernet channel A and B, if used, in your online diagram
(refer to Figure 3-44).
Please consider following rules (for a better overview and understanding):
• Ethernet A is for the device interconnection. Each Ethernet channel A connection gets an own individual
UDP TCP/IP address.
• Ethernet B is for the PLC connection. Each Ethernet channel B connection gets an own individual Mod-
bus TCP/IP address.
Figure 3-44: Example of an online diagram with according network
To Next Page
Loading...
