Woodward DTSC-200A - Home Page Display Fields

Manual 37941A DTSC-200A - ATS Controller - Operation
Page 12/37 © Woodward
Navigation
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
Individual display screens are listed in the following text. All instruments, which are available in the individual
screens, are described with their function.
Screen "Automatic operation" / "Start screen" [all application modes]
Information Text Field
Timer Countdown Field
Source Conditions
Event timer active
Navigation Button
Overview
Information Text Field
Information Text Field
The field indicates the current action.
Timer Countdown Field
Timer Countdown Field
On this place appears the countdown timer of the different states.
Some timers are allowed to be bypassed through the BYPASS
button if the BYPASS button over the LED is flashing.
Source Conditions
Source Conditions Field
The condition of the source S1 and source S2 can be observed
here.
Event timer active
Event Timer Active
It appears an *E* on this place if any exercise timer is activated.
Navigation Button
Overview
Navigation Button Overview
There is on the top right in nearly all screens the navigation but-
ton overview
25
indicated. For better navigation it tells the oper-
ator which function is laying on which button (
6
,
7
,
8
,
9
,
10
,
11
) at the moment. For more details refer to Navigation
Button Overview explanation above.