Woodward DTSC-200A - Battery Voltage, Discrete I;O, and Time;Date Displays

Manual 37941A DTSC-200A - ATS Controller - Operation
Page 14/37 © Woodward
Screen "Battery voltage value - Details" [all application modes]
This screen shows the DC supply voltage of the device. Usually it is the
battery voltage of the power panel. The measured battery voltage value is
displayed graphically and numerically.
Screen "Discrete inputs / discrete (relay) outputs – Status display" [all application modes]
This screen shows the discrete input and discrete output status on the de-
vice connected.
Status display of the discrete inputs and discrete outputs.
(Note: The configured logic for the discrete input "N.O./N.C." will deter-
mine how the DTSC-200A reacts to the state of the discrete input. If the
respective DI is configured to N.O, the unit reacts on the energized state (
); if it is configured to N.C., it reacts on the de-energized state .)
Discrete input: energized
de-energized
Discrete output: relay activated
relay de-activated
Screen "Time / Date" [all application modes]
This screen shows time and date of the internal clock.
0000-XXX-00 – Date
0000 = Year
XXX = Month
00 = Day
00:00:00 – Time
00 = Hour
00 = Minute
00 = Second