Woodward DTSC-200A - Chapter 4. Configuration; Structure of the Parameters

Manual 37941A DTSC-200A - ATS Controller - Operation
Page 28/37 © Woodward
Chapter 4.
Configuration
This chapter provides information "how to configure the unit via the LC display" as well as the description of all
parameters that may be changed without a password. If you have the correct passwords to access all code levels
in order configure the unit, refer to manual 37940 for a description of all parameters, their setting range, and their
influence to the operation of the unit.
Structure of the Parameters
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
The parameters, which may be accessed in code level 0 (no access restrictions) are structured as follows (refer to
the Parameters section on page 30 for a more detailed description):
Main Menu
► Language
► English
► Español
► Polski
► German
► Password
► Change display contrast
► Configure monitoring
► Time until horn reset
► System parameter
► Password system
► Code level display
► Code level CAN port
► Code level serial port / DPC
► Password
► Password CAN
► Password DPC
► Factory settings
► Set clock
► Hour
► Minute
► Second
► Day
► Month
► Year
► Version