EGCP-2 Engine Generator Control Package Manual 26086
138 Woodward
Appendix B.
Download Instructions
Purpose
DOWNLOAD is a DOS-based freeware program that can upload and download
configuration files through the EGCP-2's RS-422 serial port. This program is
available through the Internet at the following location:
1. Go to www.woodward.com/software
2. In the box, select EGCP-2 Tools for all EGCP-2 related software available at
present time.
Requirements
• RS-232—RS-422 converter
• EGCP Download Cable
• DOWNLOAD.EXE, part number 9926-113 Rev B or greater
Instructions
Save the DOWLOAD.EXE file to the computer. In the following example this file
is saved in a directory called EGCP2 on the c:\ drive. Then using a DOS
command prompt, go to the directory where the download file is stored and type
DOWNLOAD –h (or –?) for a complete list of the command-line options (see
below).
Establishing a Connection:
Connect the RS-232 / RS-422 cable between the EGCP-2 and the computer.
See the Communication Ports section of chapter four in the Set Builder manual
for more information about this cable interface.
To Next Page
Loading...
