Woodward EGCP-2 - Chapter 3. Electrical Installation and Specifications

Manual 26086 EGCP-2 Engine Generator Control Package
Woodward 19
Figure 3-5. Generator Status (Voltage Line to Line)
A B C: Three phase readings for the generator.
KVA: Three phase KVA readings.
KW: Three phase KW readings.
KVR: Three phase KVAR readings.
V: Volts for each phase of the generator.
A: Amps per phase for the generator.
PF: Power Factor for each generator phase.
NOTE
Generator voltage label (VLL or VLN) will automatically switch depending on
the voltage input configuration setting. See the configuration menu section
of this manual for more detail.
Generator voltage readings and labels will automatically switch from “V”
(volts) to “KV” (kilovolts), when the voltage exceeds 9999V for that input.