Manual 26086 EGCP-2 Engine Generator Control Package
Woodward 27
Alarm / Event Log
The Alarm / Event button provides access to the EGCP-2’s Alarm and Event Log.
This log contains up to eight individual warning, alarm, or shutdown items. When
the Alarm / Event button is pressed on the EGCP-2 keypad, the right hand LCD
screen will switch to the Alarm/Event log. This log displays the following
information. For navigation within the Alarm / Event log see the menu navigation
section of this manual.
Figure 3-13. Alarm / Event Screen
ALARM NAME: The name, as defined by the particular warning, alarm, or
shutdown event.
HH:MM: The hour and minute of the alarm occurrence.
MM-DD: The Month and Day of the alarm occurrence.
####: The value of the input at the time of the alarm. This value is only visible
with a supervisor level, or higher, password.
To Next Page
Loading...
