EGCP-2 Communications Manual 26181
18 Woodward
Chapter 5.
ServLink and Watch Window
Configuration Software
In addition to the EGCP-2 HMI software, the EGCP-2 can also be configured
using the Woodward Watch Window Professional software. The Watch Window
software adds the ability to monitor data from a computer. It also allows a user to
save the control set points to a tab-delimited text file. The text file can be printed,
edited, and transferred to an EGCP-2 unit.
Watch Window Professional software is not included with the EGCP-2 panel.
This software must be purchased separately (part number 8928-800). To
evaluate the product before purchase, the software can be downloaded from the
Woodward website (www.woodward.com/ic/software). After downloading the
software, it will be active for a five day trial period, after which time, the software
will require a license to run.
The Watch Window software works similarly to the HMI software. The first step is
to connect to the control with the ServLink Server (see Chapter, Monitoring
ServLink Software Operation for information on starting a ServLink session). The
Watch Window Software will not run unless the computer is communicating with
at least one EGCP-2. Once the ServLink communication has been established,
start the Watch Window Professional program from the Windows toolbar Start
button.
The Watch Window Professional software comprises three separate windows,
each with a different function.
To Next Page
Loading...
