Manual 26174 EGCP-2 Engine Generator Control Package
Woodward 145
System load levels have dropped below 25%, and the master has sequenced
network address #2, priority 3 unit off line. The master has fully recognized the
priority change, and the new priority settings are in effect.
The above examples are typical sequencing functions of the EGCP-2. Isolated
bus applications were shown for clarity. The EGCP-2 is capable of automatic
sequencing while in parallel with the mains in the process control, or process
control soft transfer operating modes. The examples shown above for priority
changing and its effects are accurate in mains parallel multiple unit process
control modes as well.
To Next Page
Loading...
