Woodward EGCP-2 - Figure 4-2. System Status Screen-Isochronous; Figure 4-3. System Status Screen-Baseload

EGCP-2 Engine Generator Control Package Manual 26174
58 Woodward
This is what the System Status screen would look like with the mains out of spec,
the engine running, carrying 100 kW load isochronously, and the generator
voltage and frequency is within specified limits. This would be a typical screen if
the unit was set for loss of mains detection, and the mains had failed.
Figure 4-2. System Status Screen—Isochronous
This is what the System status screen looks like for a generator set that is base
loaded to the mains at 500 kW, 0.80 lagging PF, with one unacknowledged
alarm.
Figure 4-3. System Status Screen—Baseload