Woodward EGCP-2 - Figure 4-15. Empty Event Log

EGCP-2 Engine Generator Control Package Manual 26174
70 Woodward
In the event that the Alarm /Event Log key is pressed, and there are no active or
logged alarms, the display will look like this:
Figure 4-15. Empty Event Log
The alarms displayed in the alarm / event log are arranged in a first in, last out
(FILO) order. The most recent alarms will appear at the top of the list, followed by
older alarms. In the event that the total number of logged and unacknowledged
alarms exceeds sixteen, the oldest alarms will be dropped off the list to make
room for the newer alarm events. If power is cycled to the control, the Event log
will be cleared.