EGCP-2 Engine Generator Control Package Manual 26174
72 Woodward
Figure 4-16c. Configuration Menu List (Screen 3)
See Manual 26108 (shipped with each control) for security code and
access level information.
Various Security codes access different portions of the configuration screens,
depending on the level of security code used. The up and down keys are used to
move the blinking cursor to the tuning menu that the user wants to enter.
Pressing the enter key will access that configuration menu. See the Navigation
Procedure in Chapter 2 of this manual for information on navigating through the
configuration menus.
Sanity Checks
In order to prevent improper configuration that may damage the generator set
when started, the EGCP-2 runs through a series of “sanity checks”. The items
involved, all in the Configuration menu, for these “sanity checks” are:
1. Numbers of Poles
2. Number of Teeth
3. System Frequency
4. Rated Speed
5. Rated kW
6. Rated kVA
7. CT Ratio
8. PT Ratio
9. Voltage Input
10. Voltage Ref
To Next Page
Loading...
