Woodward GCP-30 Series - Real Time Clock (XPD, XPQ)

Manual 37365A GCP-30 Series Packages - Genset Control
Page 142/179 © Woodward
Real Time Clock (XPD, XPQ)
NOTE
If multiple GCP control units are on a common CAN bus, all clocks are synchronized daily at 12:00
o'clock (noon) to the time of the control with the lowest CAN bus ID/generator number (Parameter 4).
T
his makes it essential that each GCP has a different control number.
Parameter 283
Time
00:00
Real time clock; time
Setting of the hours and minutes of the internal real time clock.
Hour
00
0
th
hour of the day (midnight)
01
1
s
t
hour of the day
...
...
23
23
rd
hour of the day
Minute
00
0
th
minute of the hour
01
1
s
t
minute of the hour
...
...
59
59
th
minute of the hour
Parameter 284
Year,month
00,01
Real time clock; year/month
Setting the year and month of the internal real time clock.
Year
99
Year 1999
00
Year 2000
01
Year 2001
...
...
Month
01
January
02
February
...
...
12
December
Parameter 285
Day/weekday
01/1
Real time clock; day/day of week
Setting of the day and weekday of the internal real time clock.
Day
01
1st of the month
02
2nd of the month
...
...
31
31st of the month, if available
Weekday
1
Monday
2
Tuesday
...
...
7
Sunday