Woodward LS-5 v2 Series - Operation; Access Via PC (Toolkit); Install Toolkit

5 Operation
The LS-5 can be operated, monitored and con󰈡gured using the following access methods:
•
Access via the front panel (LS-52x only): ╚═▷ “5.2 Front Panel Access”
• External access with a PC using the ToolKit con󰈡guration software: ╚═▷ “5.1 Access
Via PC (ToolKit)”
•
External command access using Modbus/CANopen protocols: ╚═▷ “7 Interfaces And
Protocols”
5.1 Access Via PC (ToolKit)
Version
Woodward’s ToolKit software is required to access the unit via PC
• Required version: 5.6.3 or higher
• Please use the latest available version!
• For information on how to obtain the latest version see ╚═▷ Chapter 5.1.1.
5.1.1
Install ToolKit
⚙
Load from CD
1. ▷
Insert the product CD (as supplied with the unit) in the CD-ROM drive of your computer.
▶
Fig. 84: Product CD - HTML menu
The HTML menu is opened automatically in a browser.
The 'autostart' function of your operating system needs to be activated.
Alternately open the document "start.html" in the root directory of the CD in
a browser.
214 LS-5 v2 Series 37650
5 Operation
Released