Woodward LS-5 v2 Series - Connect Toolkit

Please do not change the default installation folder! Otherwise the language selection
will not work properly.
5.1.4
Connect ToolKit
⚙
Standard connection
1. ▷
The USB/RS-232 serial interface is only provided via the optional Woodward
DPC (direct con󰈡guration cable), which must be connected to the service
port.
For additional information refer to ╚═▷ “7.1.3.1 Service Port (RS-232/USB)”.
Plug the DPC cable into the service port. Use a USB/null modem cable to connect the
USB/RS-232 serial port of the DPC to a serial USB/COM port of the PC.
If the PC does not have a serial port to connect the null modem cable to, use
a USB to serial adapter.
2. ▷
Open ToolKit from the Windows Start Menu path [Programs / Woodward / ToolKit 5.x].
3. ▷
From the main ToolKit window, select [File / Open Tool...] click the »Open Tool« icon on
the tool bar.
4. ▷
Locate and select the desired tool 󰈡le (*.WTOOL) in the ToolKit data 󰈡le directory and
click »Open«.
5. ▷
From the main ToolKit window, click Device then click “Connect”, or select the Connect
icon on the toolbar.
▶
Fig. 91: Connect dialog
The connect dialog will open if the option is enabled.
6. ▷
Select the COM port that is connected to the communication cable.
7. ▷
Click the »Connect« button.
▶
The identi󰈡er of the device that ToolKit is connected to, will display in the status bar.
8. ▷
If the communications window opens, select »ToolCon󰈡gurator« from the »Tool
Device« list and close the communications window.
219LS-5 v2 Series37650
5 Operation
5.1 Access Via PC (ToolKit)
Released