Woodward LS-5 v2 Series - View and Set Values in Toolkit

SID 󰂢les for additional CANopen devices
When connecting a PC to the LS-5 via CAN bus, other external CANopen devices (like a
Phoenix Contact I/O expansion board, for example) may cause ToolKit to fail to connect.
A cause may be that ToolKit looks for a SID 󰈡le for the external device, which does not
exist.
A special *.sid 󰈡le can be created in this case.
For additional support feel free to contact Woodward.
⚙
Create a SID (text) 󰆟le with the following content:
1. ▷
<?xml version="1.0" encoding="utf-8"?>
<ServiceInterfaceDefinition xmlns:xsi="http://www.w3.org/ 2001/XMLSchema-
instance"
Identifier="[device application name]" Specification="EmptyFile">
</ServiceInterfaceDefinition>
2. ▷
Name the 󰈡le [CANopen device identifier].sid
3. ▷
Store the 󰈡le in the con󰈡gured SID directory
5.1.5
View And Set Values In ToolKit
Basic navigation
ToolKit o󰈠ers the following graphical elements for basic navigation:
Graphical element Caption Description
Navigation buttons Select main and subordinate con󰈡guration
pages
Navigation list To directly select a con󰈡guration page based
on its name
Buttons »Previous
page« and »Next page«
To go to the previous/next con󰈡guration page
(as ordered in the list)
Value and status 󰂢elds
Graphical element Caption Description
Value 󰈡eld To directly input (alpha)numeric values
Option 󰈡eld To select from a preset list of options
Connection status 󰈡eld Displays active port and unit connection status
221LS-5 v2 Series37650
5 Operation
5.1 Access Via PC (ToolKit)
Released