Woodward LS-5 v2 Series - Main Menu Screens; Main Screen Display

5.2.3
Main Menu Screens
5.2.3.1 Main Screen Display
Fig. 108: LS-5x2 Main screen (example)
The amount of information available from the system depends on how the measuring is
con󰈡gured in the control unit.
The following values can be shown:
Value Monitoring Notes
System A voltage L1-L2 / L2-L3 / L3-L1 / L1-N / L2-N /
L3-N
changeable - see table below
System A frequency average
System A current average
System A active power total
System A power factor average
System B voltage L1-L2 / L2-L3 / L3-L1 / L1-N / L2-N /
L3-N
changeable - see table below
System B frequency average
System B current L1
System B active power total
System B power factor average
Tab. 27: Measuring values page one
Fig. 109: LS-5x2 Main screen (example)
The voltage display softkey on the main screen changes the type of voltage display
(1st row).
The following table illustrates what voltage values for system A and system B are
available depending on the con󰈡gured measurement type:
239LS-5 v2 Series37650
5 Operation
5.2 Front Panel Access
Released