Woodward LS-5 v2 Series - Display and Status Indicators

DANGER!
Be aware that there are di󰈠erences
• in terminals between an LS-5x1 series device, an LS-5x1 v2 series device and an
LS-5x2 v2 series device.
• in behavior between an LS-5x1 v2 series device and an LS-5x2 v2 series device.
Refer to the comprehensive chapters indicated below to commission the control unit:
• ╚═▷ “3 Installation” provides information on how to mount the unit and setup
connections.
•
╚═▷ “4 Con󰈡guration” provides information on basic setup and reference information
on all con󰈡gurable parameters.
• ╚═▷ “5 Operation” provides information on how to access the unit via the front panel
or remotely using the ToolKit software provided by Woodward.
• ╚═▷ “6 Application” provides application examples as well as instructions for the
corresponding required con󰈡guration.
• ╚═▷ “7 Interfaces And Protocols” provides reference information on the usage of the
interfaces and protocols provided by the control unit.
2.1
Display And Status Indicators
LS-522 display
Fig. 4: Display
24 LS-5 v2 Series 37650
2 System Overview
2.1 Display And Status Indicators
Released