Woodward LS-5 v2 Series - Page 25

The display (╚═▷ Fig. 4) as part of the LS-522 is used for direct access to status
information and con󰈡guration.
For information on the usage of the graphical user interface refer to ╚═▷ “5.2 Front Panel
Access”.
The LS-512 is not equipped with a display and requires remote access for con󰈡guration
(╚═▷ “5.1 Access Via PC (ToolKit)”).
LS-512 LEDs
Fig. 5: Position of LEDs
1 LEDs representing LogicsManager states
2 LED 'CPU OK'
The LS-51x unit with metal housing and without display and buttons features 9 LEDs (╚═▷
Fig. 5) on the front plate.
The LEDs indicate the following states:
State Indication
NOT illuminated Not triggered (LogicsManager condition not met).
Illuminated red Triggered (LogicsManager condition met).
Tab. 1: LEDs 'LogicsManager states'
State Indication
NOT illuminated CPU error/unit o󰈤ine.
25LS-5 v2 Series37650
2 System Overview
2.1 Display And Status Indicators
Released