Woodward LS-5 v2 Series - Change Operating Modes

5.3 Change Operating Modes
Startup
The LS-5 starts in the operating mode de󰈡ned by parameter
8827.
Select Operating Mode
The operating mode can be selected via
• front panel buttons (plastic housing variant) or
• LogicsManager con󰈡guration
This chapter describes the manually front panel access. Please refer to chapter ╚═▷
“4.4.4 Automatic Run” how to change the operating mode via LogicsManager.
Fig. 138: LS-522 v2, 2breaker front panel
1 Mode button: MAN
2
Mode button: AUTO
4 .. 6 Soft buttons, current function displayed with the according symbol on screen;
e.g. breaker A (4) or breaker B (6) OPEN/CLOSE
252 LS-5 v2 Series 37650
5 Operation
5.3 Change Operating Modes
Released