Woodward LS-5 v2 Series - Setup LS-5 Flags from LS-5 to LS-5 and Easygen

Fig. 149: easYgen information transport to LS-5
6.4.2.9 Setup LS-5 Flags From LS-5 To LS-5 And easYgen
Overview
The LS-5 󰈢ags generated in the LS-5 device with LogicsManager equations can be used
from connected LS-5 and easYgen devices. Each LS-5 sends 󰈡ve 󰈢ags over the CAN
interface.
The system allows to inform or to command something to other units. In the example the
'acknowledge' command can be sent to all other units to reset alarms. All bits are
individual.
276 LS-5 v2 Series 37650
6 Application
6.4 Setup easYgen & Independent LS-5x2 Applications (Mode A02)
Released