Woodward LS-5 v2 Series - Approvals; Generic Note; Environmental Data

Dimensions (W × H × D) Plastic 219 × 171 × 61 mm
Sheet metal 190 × 167 × 47 mm
Front cutout (W × H) Plastic 186 [+1.1] × 138 [+1.0] mm
Wiring Screw-plug-terminals 2.5 mm²
Recommended locked torque 4 inch pounds / 0.5 Nm
Use 60/75 °C copper wire only
Use class 1 wire only or equivalent
Weight Plastic approx. 850 g
Sheet metal approx. 840 g
Protection
Protection system Plastic IP54 from front with clamp fasteners
IP66 from front with screw kit
IP20 from back
Sheet metal IP20
Front foil (plastic housing) Insulating surface
8.1.7
Approvals
EMC test (CE) Tested according to applicable EN guidelines
Listings CE marking
UL / cUL, Ordinary Locations, File No.: 231544
Marine Type approval Pending: Lloyds Register (LR)
Design assessment Pending: American Bureau of Shipping (ABS)
8.1.8
Generic Note
Accuracy Referred to full scale value
8.2 Environmental Data
Vibration
Frequency range - sine sweep 5 Hz to 100 Hz
Acceleration 4 G
Standards EN 60255-21-1 (EN 60068-2-6, Fc)
Lloyd’s Register, Vibration Test2
SAEJ1455 Chassis Data
309LS-5 v2 Series37650
8 Technical Speci󰈡cations
8.2 Environmental Data
Released