Woodward LS-5 v2 Series - Installation; Mount Unit (Sheet Metal Housing)

3 Installation
3.1
Mount Unit (Sheet Metal Housing)
Dimensions
Fig. 8: Sheet metal housing - dimensions
⚙
Mounting into a cabinet
ᐳ
•
Special tool: Torque screwdriver
Proceed as follows to install the unit using the screw kit:
1. ▷
Fig. 9: Sheet metal housing - drill plan
Drill the holes according to the dimensions in ╚═▷ Fig. 9 (dimensions shown in mm).
32 LS-5 v2 Series 37650
3 Installation
3.1 Mount Unit (Sheet Metal Housing)
Released