Woodward LS-5 v2 Series - Logical Outputs

Row ... according to standard:
A IEC
B LS-5 (default: DIN 40 700)
C ASA
US MIL
D IEC617-12
Meaning of the columns
1 2 3 4 5 6
AND OR NAND NOR NXOR XOR
AND OR NAND NOR NXOR XOR
x1 x2 y x1 x2 y x1 x2 y x1 x2 y x1 x2 y x1 x2 y
0 0 0 0 0 0 0 0 1 0 0 1 0 0 1 0 0 0
0 1 0 0 1 1 0 1 1 0 1 0 0 1 0 0 1 1
1 0 0 1 0 1 1 0 1 1 0 0 1 0 0 1 0 1
1 1 1 1 1 1 1 1 0 1 1 0 1 1 1 1 1 0
Tab. 40: Truth table
9.3.3
Logical Outputs
The logical outputs or combinations may be grouped into three categories:
• Internal logical 󰈢ags
•
Internal functions
• Relay outputs
The numbers of the logical outputs in the third column may again be used as input
variable for other outputs in the LogicsManager.
Internal 󰂣ags
16 internal logical 󰈢ags may be programmed to activate/deactivate functions. This
permits more than 3 commands to be included in a logical function. They may be used
like "auxiliary 󰈢ags".
Name Function Number
Flag 1 Internal 󰈢ag 1 00.01
Flag 2 Internal 󰈢ag 2 00.02
Flag 3 Internal 󰈢ag 3 00.03
Flag 4 Internal 󰈢ag 4 00.04
403LS-5 v2 Series37650
9 Appendix
9.3 LogicsManager Reference
Released