Woodward LS-5 v2 Series - Logical Command Variables; Group 00: Flags Condition 1

9.3.4
Logical Command Variables
The logical command variables are grouped into di󰈠erent categories
• Group 00: Flags condition 1
• Group 01: Alarm system
•
Group 02: Systems condition
• Group 04: Applications condition
• Group 05: Device related alarms
•
Group 06: System B (SyB.) related alarms
• Group 07: System A (SyA.) related alarms
• Group 08: System related alarms
• Group 09: Discrete inputs
• Group 10: Analog inputs
• Group 11: Clock and timer
• Group 13: Discrete outputs
•
Group 17: Alarm system 2
• Group 24: Flags condition 2
• Group 26(/1-2): Flags of LS-5 device 33 to 48
• Group 27(/1-2): Flags of LS-5 device 49 to 64
• Group 28: LS-5 system conditions
• Group 29(/1-3): Commands of easYgen device 1 to 16
• Group 30(/1-3): Commands of easYgen device 17 to 32
9.3.4.1 Group 00: Flags Condition 1
• Flags condition 1
• Logic command variables 00.01-00.95
Internal Flags are the result of the output of the logic ladders from Flag 1 to 16. Flags are
internal logic that can be sent to other 󰈢ags or Command variables.
'LM' means that these logical command variables are the result of a LogicsManager
condition.
No. Name Function Note
00.01 LM Flag 1 Internal 󰈢ag 1 Internal calculation; refer to ╚═▷
“ Internal 󰈢ags”
00.02 LM Flag 2 Internal 󰈢ag 2 Internal calculation; refer to ╚═▷
“ Internal 󰈢ags”
407LS-5 v2 Series37650
9 Appendix
9.3 LogicsManager Reference
Released