Woodward LS-5 v2 Series - Event and Alarm Reference; Alarm Classes

Simple (function) Extended (con󰆟guration) Result
Relay energizes if the internal condition
"Open CBB" is TRUE
[00.44] Relay 4 [R04] - Command: close CBB
Fixed function "Close CBB" Not con󰈡gurable
[00.45] Relay 5 [R05] - Command: open CBA
Fixed function "Open CBA" Not con󰈡gurable
[00.46] Relay 6 [R06] – Close CBA (in CBA: two relay mode) / All alarm classes
In two relay mode 󰈡xed to "close CBA".
Otherwise the relay energizes if "All alarm
classes" is TRUE
FALSE
Discrete inputs
DI Alarm class Pre-assigned to
1 CONTROL freely con󰈡gurable LogicsManager 'Lock monitoring'
2 CONTROL freely con󰈡gurable LogicsManager 'Remote acknowledge'
3 CONTROL freely con󰈡gurable LogicsManager 'Open CBB (with unloading)'
4 CONTROL freely con󰈡gurable LogicsManager 'Enable to close CBB'
5 󰈡xed Reply: CBB is open
6 CONTROL freely con󰈡gurable LogicsManager 'Open CBA (with unloading)'
7 CONTROL freely con󰈡gurable LogicsManager 'Enable to close CBA'
8 󰈡xed Reply: CBA is open
9.4 Event And Alarm Reference
9.4.1 Alarm Classes
The control functions are structured in the following alarm classes:
432 LS-5 v2 Series 37650
9 Appendix
9.4 Event And Alarm Reference
Released