Woodward LS-5 v2 Series - Serial Interface; Interface

Terminal Description A
max
Common N.O.
A C Form A
32 33 Relay output [R 02] All
Precon󰈡gured to "Horn"
1
2.5
mm²
34 35 Relay output [R 03] All
Precon󰈡gured to “Open CBB”
1
2.5
mm²
36 37 Relay output [R 04] All Fixed to “Close CBB” 2.5
mm²
41 42 Relay output [R 06] All Fixed to "Close CBA" in [CBA: Two relay] mode
otherwise precon󰈡gured to "All alarm classes"
1
2.5
mm²
Terminal Description A
max
Common N.C. N.O.
A B C Form C
38 39 40 Relay output [R 05] All Fixed to “Open CBA” 2.5
mm²
Notes
1
con󰈡gurable via LogicsManager
Notes
• LogicsManager: Using the function LogicsManager it is possible to freely program
the relays for all application modes.
• N.O.: normally open (make) contact
N.C.: normally closed (break) contact
3.3.11
Serial Interface
3.3.11.1 RS-485 Interface
General notes
Please note that the RS-485 interface only operates in half-duplex mode.
Pin assignment
Terminal Description A
max
58 RS-485-B (TxD-) N/A
68 LS-5 v2 Series 37650
3 Installation
3.3 Setup Connections
Released