Woodward LS-5 v2 Series - Service Port

Terminal Description A
max
59 RS-485-A (TxD+) N/A
Tab. 9: Pin assignment
RS-485 half-duplex
Fig. 65: RS-485 - connection for half-duplex operation
3.3.12
Service Port
Service port connector
Fig. 66: Service port connector (RJ-45)
The Woodward speci󰈡c service port is a connector (RJ-45) to extend the interfaces of the
controller.
The service port can be
only used in combination with an optional Woodward direct
con󰈡guration cable (DPC).
Direct con󰂢guration cable (DPC)
The DPC cable is used to con󰈡gure the device with the ToolKit con󰈡guration software and
external extensions/applications.
69LS-5 v2 Series37650
3 Installation
3.3 Setup Connections
Released