Woodward LS-5 v2 Series - System Management

10400 Password display 0 0000 to 9999
[random number]
The password for con󰈡guring the
control via the front panel must be
entered here.
10405 Code level display 0 (display only)
[0]
This value displays the code level,
which is currently enabled for access
via the front panel display.
10402 Password for CAN interface 1 0 0000 to 9999
[random number]
The password for con󰈡guring the
control via the CAN interface #1 must
be entered here.
10407 Code level CAN interface 1 0 (display only)
[0]
This value displays the code level,
which is currently enabled for access
via the CAN interface #1.
10401 Password for serial interface 1 0 0000 to 9999
[random number]
The password for con󰈡guring the
control via RS-232 serial interface #1
must be entered here.
10406 Code level serial interface 1 0 (display only)
[0]
This value displays the code level,
which is currently enabled for access
via RS-232 serial interface #1.
10430 Password for serial interface 2 0 0000 to 9999
[random number]
The password for con󰈡guring the
control via RS-485 serial interface #1
must be entered here..
10420 Code level serial interface 2 0 (display only)
[0]
This value displays the code level,
which is currently enabled for access
via RS-485 serial interface #1.
4.1.4
System Management
ID Parameter CL Setting range
[Default]
Description
1702 Device number 2 33 to 64
[33]
A unique address is assigned to the
control though this parameter. This
unique address permits the controller
to be correctly identi󰈡ed on the CAN
bus. The address assigned to the
controller may only be used once.
All other bus addresses are calculated
on the number entered in this
parameter.
Notes
82 LS-5 v2 Series 37650
4 Con󰈡guration
4.1 Basic Setup
Released