Woodward LS-5 v2 Series - Password System; Configure Status;Monitoring (Home) Screen

4.1.5
Password System
General notes
The following passwords grant varying levels of access to the parameters.
Each individual password can be used to access the appropriate con󰈡guration level
through multiple access methods and communication protocols (via the front panel, via
serial RS-232/485 interface, and via the CAN bus).
ID Parameter CL Setting range
[Default]
Description
10415 Basic code level 1 1 to 9999
[-]
The password for the code level
"Service" is de󰈡ned in this parameter.
Refer to ╚═▷ “4.1.3 Enter Password”
for default values.
10413 Commissioning code level 3 1 to 9999
[-]
The password for the code level
"Commission" is de󰈡ned in this
parameter.
Refer to ╚═▷ “4.1.3 Enter Password”
for default values.
10414 Temp. commissioning code level 3 1 to 9999
[-]
The algorithm for calculating the
password for the code level
"Temporary Commissioning" is de󰈡ned
in this parameter.
10412 Temp. supercomm. level code 5 1 to 9999
[-]
The algorithm for calculating the
password for the code level
"Temporary Supercommissioning" is
de󰈡ned in this parameter.
10411 Supercommissioning level code 5 1 to 9999
[-]
The password for the code level
"Supercommissioning" is de󰈡ned in
this parameter.
Refer to ╚═▷ “4.1.3 Enter Password”
for default values.
4.1.6
Con󰆟gure Status/Monitoring (home) screen
Con󰂢gure HMI
Con󰈡gurable
via ToolKit only!
85LS-5 v2 Series37650
4 Con󰈡guration
4.1 Basic Setup
Released