Woodward LS-5 v2 Series - Configure Measurement

System A and system B text can be con󰈡gured. It will be used with Status/Monitoring
screen for HMI and home screen of ToolKit. The parameters of system A and system B will
still come with "SysA / SyA." or "SysB / SyB." noti󰈡cation - the customizable text described
below is just a heading.
ID Parameter CL Setting range
[Default]
Description
1891 Description system A 2 1 to 5 characters
[SysA]
Name is displayed on ...
• page 1 of HMI home screen
Status/monitoring:
to the left of the values of system
A
• page 2 of HMI home screen
Status/monitoring:
above values of system A
• ToolKit home screen:
as single line description at
system A side
Notes
The max. possible number of
characters is eight but only 󰈡ve will be
displayed correctly on HMI/display.
1892 Description system B 2 1 to 5 characters
[SysB]
Name displayed on ...
• page 1 of HMI home screen
Status/monitoring:
to the left of the values of system
B
• page 2 of HMI home screen
Status/monitoring:
above values of system B
• ToolKit home screen:
as single line description at
system B side
Notes
The max. possible number of
characters is eight but only 󰈡ve will be
displayed correctly on HMI/display.
Tab. 13: Parameters Customer Screen Con󰄢guration
4.2 Con󰆟gure Measurement
ID Parameter CL Setting range
[Default]
Description
86 LS-5 v2 Series 37650
4 Con󰈡guration
4.2 Con󰈡gure Measurement
Released