Settings in the main menu
Comfort+ II RF – 6720886122 (2018/07)
10
4.2.4 Setting the room temperature
The display shows the current room temperature in normal
mode.
Turn the selector anticlockwise in the Auto or On operating
mode to reduce the set value for room temperature, or
clockwise to increase it. The selected temperature flashes for
three seconds.
The new temperature appears briefly on the display and also
the switching time when this temperature applies.
Fig. 12 Room temperature set value
4.3 Key lock
When the key block is active, interaction between the user and
control unit is not possible. Key lock appears when the key is
pressed or the selector is pressed/turned.
Activating the key block
To activate the key block:
▶ Press and hold the select heating key and selector
simultaneously until Key lock is displayed.
After a short time, the standard display reappears.
Switching the key block off
To deactivate the key block:
▶ Press and hold the select heating key and selector
simultaneously until Key lock is no longer displayed.
After a short time, the standard display reappears.
5 Settings in the main menu
▶ Press the menu key until the main menu is displayed.
Fig. 13 Main menu
[1] Heating
[2] DHW
[3] Holiday
[4] Information
[5] settings
▶ Turn the selector to select the a symbol.
A frame appears round the selected symbol.
▶ Press the selector to open the menu.
Flashing arrows indicate that additional menus are
available.
▶ Press the key to return to the higher-level menu.
The display backlighting switches off after 20 seconds of user
inactivity until a key is pressed again or the selector is pressed/
turned.
The standard display reappears after 60 seconds of user
inactivity.
0010009671-002
pmam
2
3
4
5
1
pmam
0010009672-002
To Next Page
Loading...
Need help?
General
