simple to fit
worcester-bosch.co.uk/wave
The Wave is easy to install, requiring just a low voltage 2-core
wire connection between the control and the boiler. All other
connections are via the Wi-Fi network.
Unlike standard weather compensation controls, the Wave does
not need an external wired sensor. Instead, the Wave uses online
data which significantly reduces installation time and cost to the
end user.
Ideal for homes and small businesses, the Wave is compatible
with many Greenstar gas-fired boilers. For full details see the
Worcester website.
All you need is:
●
Worcester Wave control
●
Compatible Worcester boiler
●
Wi-Fi enabled broadband router – 802.11 b/g
●
The Wave app on a compatible Apple® or Android™ device.
Compatible with the following Greenstar gas boilers:†
●
Greenstar CDi boilers: combi and system* boilers manufactured
after 16th January 2007 with software version CF12.10 onwards.
●
Greenstar Si and i System* boilers: manufactured from
February 2011 onwards, models produced earlier than this
date are not compatible.
●
Greenstar i Junior boilers: manufactured from July 2013 onwards,
models produced earlier than this date are not compatible.
* Greenstar CDi System and Greenstar i System boilers must have the optional integral diverter
valve fitted to work with the Wave control. †Correct at time of printing.
To Next Page
Loading...
Need help?
General
