Need help?Do you have a question about the Workhorse Products SABRE Series and is the answer not in the manual?
Explains the purpose of the manual to familiarize users with the Sabre's parts and operations.
Details specifications for SAB68, SAB810, SAB1012, SAB1214, SFB2020, and Quartz Flashes.
Describes the Sabre's electronic indexing, registration system, and printing quality.
Alerts operators to safe operation practices and potential hazards.
Details safety rules for installation, operation, and maintenance.
Actions to take during an emergency: stop button or disconnect safety cables.
Details Main Air Lockout Valve and Safety Cable functions.
Lists functions on the 'off' screen and under the system button like updates, registration, Wi-Fi.
Explains print modes and control buttons like Begin, Pause, Finish, Skip Shirt.
Details Advanced FB settings, pallet management, and system status access.
Covers Active, Home Position, Strokes, Step Back, Ink Type, and Flash controls.
Explains functions within the Timers and Counter menus, including step back operation.
Details Advanced Flashback settings and the machine registration process.
Access to Troubleshooting, Maintenance, Print Arms I/O, and real-time input status.
Provides suggestions for screen making, including pre-registration and centering.
Adjusts image position using front and rear knobs for precise alignment.
Locks squeegee/flood bar, screen clamps, and controls carriage speeds.
Manages table up, index tables, manual test prints, and flash status.
Explains manual test, table cycling, pallet lift, and speed adjustments via buttons/knobs.
Covers stroke length adjustments and air pressure regulators/gauges.
Shows air pressure gauge and recommends 35-40 PSI for optimal results.
Loosens knob to pivot screen clamp for clearance in flash.
Pivots head up for clearance needed for flash/Flashback in Heads Up Mode.
Instructions for installing squeegee/flood bar and setting recommended angles.
Guides setting squeegee/flood bar pressure, ensuring gap, and using adjustment knobs.
Explains factory setting and adjustability of machine's off contact using metal tabs.
Explains that the control box is telescopic and adjustable via a handle.
Guides inspection, leveling using wrenches/nuts, and important notes for all pallets.
Warns about air moisture and recommends basic maintenance like draining and filter changes.
Details lubrication and inspection tasks based on machine cycle numbers.
Covers liability disclaimers, coverage period, installation, and registration requirements.
Outlines steps for returning parts and processing warranty claims, including exclusions.
General| Substrate Compatibility | Textiles, garments |
|---|---|
| Indexing | Automatic |
| Registration | Automatic |
| Power Requirements | 220V, Single Phase, 50/60 Hz, 20 Amps |
| Print Resolution | Up to 1200 x 1200 dpi |
| Maximum Print Width | 63.5 inches |
| Supported Media Types | Garments, textiles |
| Media Width | Up to 63.5 inches |
| Operating Temperature | 15-30°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
