Need help?Do you have a question about the World Friendship WF-600T Series and is the answer not in the manual?
General| Model | WF-600T Series |
|---|---|
| Category | Inverter |
| Cooling Method | Fan Cooling |
| Operating Temperature | -10°C to 50°C |
| Input Voltage | 12V DC / 24V DC / 48V DC (depending on model) |
| Output Voltage | 110V AC / 220V AC (depending on model) |
| Frequency | 50Hz / 60Hz (depending on model) |
| Protection Features | Overload, Over Voltage, Over Temperature, Short Circuit |
| Output Power | 600W |
General safety guidelines for inverter operation and installation to prevent hazards.
Safety measures and precautions when handling and working with lead-acid batteries.
Overview of the WF-600T inverter's compliance, applications, and transfer switch functionality.
Lists key product features like continuous/surge output, pure sine wave, transfer switch, and smart controller.
Details safety protections such as over/under voltage, over temperature, overload, and short circuit.
Illustrates the physical dimensions and layout of the WF-600T inverter unit.
Explains the function of the ON/OFF/REMOTE switch for controlling the inverter.
Describes the 7Amp circuit breaker for overload protection and reset procedure.
Details the remote port, battery terminals, and chassis ground connection points on the front panel.
Guidelines for ensuring adequate airflow and clearance around the inverter for cooling.
Instructions for connecting the AC power source directly to the inverter.
Explains the meaning of the LED indicators for inverter status (solid red, blinking fast/slow).
Describes R.O.F. and Ignition Lockout functions, jumper settings, and wiring requirements for remote operation.
Procedures for connecting AC input/output grounding and neutral grounding for safety compliance.
Requirements for GFCI protection in RV installations and recommended GFCI receptacles.
Location of the AC wiring compartment and how to access it for connections.
Details terminal connections, wire colors, and gauges for AC output wiring.
Emphasizes the importance of verifying all wiring connections are correct and tight.
Requirements for battery cable fusing, including type, placement, and NEC compliance.
Critical warning about fuse installation on the positive cable to prevent damage and void warranty.
Explains the ON/OFF/REMOTE switch and the input voltage ranges for operation.
Details the LED status indicators for displaying DC input voltage levels.
Explains the LED indicators that show the AC load level in watts.
Describes the LED indicators for power status, including normal operation and fault conditions.
Provides guidance on identifying and resolving common problems and symptoms with the inverter.
Lists specific conditions and actions that are excluded from the OEM warranty coverage.
Details the process for obtaining warranty service, including contacting the dealer and obtaining an RGA number.
To Next Page